Started the doumentation source

.gitignore

@@ -2,3 +2,4 @@
 test*
 __pycache__
 *.db
+/docs/build/

docs/Makefile

@@ -0,0 +1,20 @@
+# Minimal makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line, and also
+# from the environment for the first two.
+SPHINXOPTS    ?=
+SPHINXBUILD   ?= sphinx-build
+SOURCEDIR     = source
+BUILDDIR      = build
+
+# Put it first so that "make" without argument is like "make help".
+help:
+	@$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
+
+.PHONY: help Makefile
+
+# Catch-all target: route all unknown targets to Sphinx using the new
+# "make mode" option.  $(O) is meant as a shortcut for $(SPHINXOPTS).
+%: Makefile
+	@$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)

docs/make.bat

@@ -0,0 +1,35 @@
+@ECHO OFF
+
+pushd %~dp0
+
+REM Command file for Sphinx documentation
+
+if "%SPHINXBUILD%" == "" (
+	set SPHINXBUILD=sphinx-build
+)
+set SOURCEDIR=source
+set BUILDDIR=build
+
+%SPHINXBUILD% >NUL 2>NUL
+if errorlevel 9009 (
+	echo.
+	echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
+	echo.installed, then set the SPHINXBUILD environment variable to point
+	echo.to the full path of the 'sphinx-build' executable. Alternatively you
+	echo.may add the Sphinx directory to PATH.
+	echo.
+	echo.If you don't have Sphinx installed, grab it from
+	echo.https://www.sphinx-doc.org/
+	exit /b 1
+)
+
+if "%1" == "" goto help
+
+%SPHINXBUILD% -M %1 %SOURCEDIR% %BUILDDIR% %SPHINXOPTS% %O%
+goto end
+
+:help
+%SPHINXBUILD% -M help %SOURCEDIR% %BUILDDIR% %SPHINXOPTS% %O%
+
+:end
+popd

docs/source/conf.py

@@ -0,0 +1,27 @@
+# Configuration file for the Sphinx documentation builder.
+#
+# For the full list of built-in configuration values, see the documentation:
+# https://www.sphinx-doc.org/en/master/usage/configuration.html
+
+# -- Project information -----------------------------------------------------
+# https://www.sphinx-doc.org/en/master/usage/configuration.html#project-information
+
+project = 'JMK Engineering Python Library'
+copyright = '2025, Jeff MacKinnon'
+author = 'Jeff MacKinnon'
+
+# -- General configuration ---------------------------------------------------
+# https://www.sphinx-doc.org/en/master/usage/configuration.html#general-configuration
+
+extensions = []
+
+templates_path = ['_templates']
+exclude_patterns = []
+
+
+
+# -- Options for HTML output -------------------------------------------------
+# https://www.sphinx-doc.org/en/master/usage/configuration.html#options-for-html-output
+
+html_theme = 'alabaster'
+html_static_path = ['_static']

docs/source/index.rst

@@ -0,0 +1,17 @@
+.. JMK Engineering Python Library documentation master file, created by
+   sphinx-quickstart on Wed Jan  1 14:10:19 2025.
+   You can adapt this file completely to your liking, but it should at least
+   contain the root `toctree` directive.
+
+JMK Engineering Python Library documentation
+============================================
+
+Add your content using ``reStructuredText`` syntax. See the
+`reStructuredText <https://www.sphinx-doc.org/en/master/usage/restructuredtext/index.html>`_
+documentation for details.
+
+
+.. toctree::
+   :maxdepth: 2
+   :caption: Contents:
+

example_notebook.ipynb

@@ -2,12 +2,12 @@
  "cells": [
   {
    "cell_type": "code",
-   "execution_count": 4,
+   "execution_count": 1,
    "metadata": {},
    "outputs": [],
    "source": [
     "import jepl.jepl as jmk # import the module. If this file is located further up the file tree it may look like \"resources.JEPL.jepl.jepl\"\n",
-    "%run jepl/jeplinit.py jepl/ # This is needed to initilize the databases. Again if you are running this from a different location the run command will look like %run jeplinit.py resources/JEPL/jepl/ "
+    "%run jepl/jeplinit.py jepl/ # This is needed to initialize the databases. Again if you are running this from a different location the run command will look like %run jeplinit.py resources/JEPL/jepl/ "
    ]
   },
   {
@@ -731,7 +731,7 @@
   },
   {
    "cell_type": "code",
-   "execution_count": 11,
+   "execution_count": 15,
    "metadata": {},
    "outputs": [
     {
@@ -740,7 +740,7 @@
        "'3'"
       ]
      },
-     "execution_count": 11,
+     "execution_count": 15,
      "metadata": {},
      "output_type": "execute_result"
     }
@@ -753,7 +753,7 @@
   },
   {
    "cell_type": "code",
-   "execution_count": 12,
+   "execution_count": 16,
    "metadata": {},
    "outputs": [
     {
@@ -762,7 +762,7 @@
        "'0.3'"
       ]
      },
-     "execution_count": 12,
+     "execution_count": 16,
      "metadata": {},
      "output_type": "execute_result"
     }
@@ -775,7 +775,7 @@
   },
   {
    "cell_type": "code",
-   "execution_count": 5,
+   "execution_count": 17,
    "metadata": {},
    "outputs": [
     {
@@ -784,7 +784,7 @@
        "'0'"
       ]
      },
-     "execution_count": 5,
+     "execution_count": 17,
      "metadata": {},
      "output_type": "execute_result"
     }
@@ -797,7 +797,7 @@
   },
   {
    "cell_type": "code",
-   "execution_count": 4,
+   "execution_count": 18,
    "metadata": {},
    "outputs": [
     {
@@ -806,7 +806,7 @@
        "'00'"
       ]
      },
-     "execution_count": 4,
+     "execution_count": 18,
      "metadata": {},
      "output_type": "execute_result"
     }
@@ -826,7 +826,7 @@
   },
   {
    "cell_type": "code",
-   "execution_count": null,
+   "execution_count": 19,
    "metadata": {},
    "outputs": [],
    "source": [
@@ -835,29 +835,6 @@
     "af_label(\"equipnum\",\"3 ft\",3,\"36 in\",\"B\",480,author=\"Jeff MacKinnon\",warning=\"warning\",project=\"Arc Flash Warning Label\",test=True)\n",
     "\n"
    ]
-  },
-  {
-   "cell_type": "code",
-   "execution_count": 10,
-   "metadata": {},
-   "outputs": [],
-   "source": [
-    "\n",
-    "from jinja2 import Environment, FileSystemLoader\n",
-    "\n",
-    "\n",
-    "environment = Environment(        block_start_string = '\\BLOCK{',\n",
-    "            block_end_string = '}',\n",
-    "            variable_start_string = '\\VAR((',\n",
-    "            variable_end_string = '))',\n",
-    "            comment_start_string = '\\#{',\n",
-    "            comment_end_string = '}',\n",
-    "            line_comment_prefix = '%#',\n",
-    "        loader=FileSystemLoader(\"jepl/templates/\")\n",
-    "                            )\n",
-    "template = environment.get_template(\"template-label-ArcFlash.tex\")\n",
-    "#print(environment.loader)"
-   ]
   }
  ],
  "metadata": {