Finished adding conduit sizing for CEC projects.
This commit is contained in:
Jeff MacKinnon
commit
d1a897a78f
16 changed files with 523 additions and 127 deletions
1
.gitignore
vendored
1
.gitignore
vendored
|
|
@ -2,3 +2,4 @@
|
||||||
test*
|
test*
|
||||||
__pycache__
|
__pycache__
|
||||||
*.db
|
*.db
|
||||||
|
/docs/build/
|
||||||
20
docs/Makefile
Normal file
20
docs/Makefile
Normal file
|
|
@ -0,0 +1,20 @@
|
||||||
|
# Minimal makefile for Sphinx documentation
|
||||||
|
#
|
||||||
|
|
||||||
|
# You can set these variables from the command line, and also
|
||||||
|
# from the environment for the first two.
|
||||||
|
SPHINXOPTS ?=
|
||||||
|
SPHINXBUILD ?= sphinx-build
|
||||||
|
SOURCEDIR = source
|
||||||
|
BUILDDIR = build
|
||||||
|
|
||||||
|
# Put it first so that "make" without argument is like "make help".
|
||||||
|
help:
|
||||||
|
@$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
|
||||||
|
|
||||||
|
.PHONY: help Makefile
|
||||||
|
|
||||||
|
# Catch-all target: route all unknown targets to Sphinx using the new
|
||||||
|
# "make mode" option. $(O) is meant as a shortcut for $(SPHINXOPTS).
|
||||||
|
%: Makefile
|
||||||
|
@$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
|
||||||
35
docs/make.bat
Normal file
35
docs/make.bat
Normal file
|
|
@ -0,0 +1,35 @@
|
||||||
|
@ECHO OFF
|
||||||
|
|
||||||
|
pushd %~dp0
|
||||||
|
|
||||||
|
REM Command file for Sphinx documentation
|
||||||
|
|
||||||
|
if "%SPHINXBUILD%" == "" (
|
||||||
|
set SPHINXBUILD=sphinx-build
|
||||||
|
)
|
||||||
|
set SOURCEDIR=source
|
||||||
|
set BUILDDIR=build
|
||||||
|
|
||||||
|
%SPHINXBUILD% >NUL 2>NUL
|
||||||
|
if errorlevel 9009 (
|
||||||
|
echo.
|
||||||
|
echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
|
||||||
|
echo.installed, then set the SPHINXBUILD environment variable to point
|
||||||
|
echo.to the full path of the 'sphinx-build' executable. Alternatively you
|
||||||
|
echo.may add the Sphinx directory to PATH.
|
||||||
|
echo.
|
||||||
|
echo.If you don't have Sphinx installed, grab it from
|
||||||
|
echo.https://www.sphinx-doc.org/
|
||||||
|
exit /b 1
|
||||||
|
)
|
||||||
|
|
||||||
|
if "%1" == "" goto help
|
||||||
|
|
||||||
|
%SPHINXBUILD% -M %1 %SOURCEDIR% %BUILDDIR% %SPHINXOPTS% %O%
|
||||||
|
goto end
|
||||||
|
|
||||||
|
:help
|
||||||
|
%SPHINXBUILD% -M help %SOURCEDIR% %BUILDDIR% %SPHINXOPTS% %O%
|
||||||
|
|
||||||
|
:end
|
||||||
|
popd
|
||||||
27
docs/source/conf.py
Normal file
27
docs/source/conf.py
Normal file
|
|
@ -0,0 +1,27 @@
|
||||||
|
# Configuration file for the Sphinx documentation builder.
|
||||||
|
#
|
||||||
|
# For the full list of built-in configuration values, see the documentation:
|
||||||
|
# https://www.sphinx-doc.org/en/master/usage/configuration.html
|
||||||
|
|
||||||
|
# -- Project information -----------------------------------------------------
|
||||||
|
# https://www.sphinx-doc.org/en/master/usage/configuration.html#project-information
|
||||||
|
|
||||||
|
project = 'JMK Engineering Python Library'
|
||||||
|
copyright = '2025, Jeff MacKinnon'
|
||||||
|
author = 'Jeff MacKinnon'
|
||||||
|
|
||||||
|
# -- General configuration ---------------------------------------------------
|
||||||
|
# https://www.sphinx-doc.org/en/master/usage/configuration.html#general-configuration
|
||||||
|
|
||||||
|
extensions = []
|
||||||
|
|
||||||
|
templates_path = ['_templates']
|
||||||
|
exclude_patterns = []
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
# -- Options for HTML output -------------------------------------------------
|
||||||
|
# https://www.sphinx-doc.org/en/master/usage/configuration.html#options-for-html-output
|
||||||
|
|
||||||
|
html_theme = 'alabaster'
|
||||||
|
html_static_path = ['_static']
|
||||||
17
docs/source/index.rst
Normal file
17
docs/source/index.rst
Normal file
|
|
@ -0,0 +1,17 @@
|
||||||
|
.. JMK Engineering Python Library documentation master file, created by
|
||||||
|
sphinx-quickstart on Wed Jan 1 14:10:19 2025.
|
||||||
|
You can adapt this file completely to your liking, but it should at least
|
||||||
|
contain the root `toctree` directive.
|
||||||
|
|
||||||
|
JMK Engineering Python Library documentation
|
||||||
|
============================================
|
||||||
|
|
||||||
|
Add your content using ``reStructuredText`` syntax. See the
|
||||||
|
`reStructuredText <https://www.sphinx-doc.org/en/master/usage/restructuredtext/index.html>`_
|
||||||
|
documentation for details.
|
||||||
|
|
||||||
|
|
||||||
|
.. toctree::
|
||||||
|
:maxdepth: 2
|
||||||
|
:caption: Contents:
|
||||||
|
|
||||||
|
|
@ -791,63 +791,6 @@
|
||||||
"jmk.bonding_conductor(jmk.conductor_ampacity(12, temp = 75, material = 'al', code = 'CEC', raceway = False, ambient = 30),bus=False,material='al',code = 'CEC')"
|
"jmk.bonding_conductor(jmk.conductor_ampacity(12, temp = 75, material = 'al', code = 'CEC', raceway = False, ambient = 30),bus=False,material='al',code = 'CEC')"
|
||||||
]
|
]
|
||||||
},
|
},
|
||||||
{
|
|
||||||
"cell_type": "code",
|
|
||||||
"execution_count": 18,
|
|
||||||
"metadata": {},
|
|
||||||
"outputs": [
|
|
||||||
{
|
|
||||||
"name": "stdout",
|
|
||||||
"output_type": "stream",
|
|
||||||
"text": [
|
|
||||||
"1\n"
|
|
||||||
]
|
|
||||||
}
|
|
||||||
],
|
|
||||||
"source": [
|
|
||||||
"import pandas as pd\n",
|
|
||||||
"import numpy as np\n",
|
|
||||||
"\n",
|
|
||||||
"wire_size = [\n",
|
|
||||||
" ['14',2.08],\n",
|
|
||||||
" ['12',3.31],\n",
|
|
||||||
" ['10',5.26],\n",
|
|
||||||
" ['8',8.37],\n",
|
|
||||||
" ['6',13.3],\n",
|
|
||||||
" ['4',21.2],\n",
|
|
||||||
" ['3',26.7],\n",
|
|
||||||
" ['2',33.6],\n",
|
|
||||||
" ['1',42.4],\n",
|
|
||||||
" ['1/0',53.5],\n",
|
|
||||||
" ['2/0',67.4],\n",
|
|
||||||
" ['3/0',85],\n",
|
|
||||||
" ['4/0',107],\n",
|
|
||||||
" ['250',127],\n",
|
|
||||||
" ['300',152],\n",
|
|
||||||
" ['350',177],\n",
|
|
||||||
" ['400',203],\n",
|
|
||||||
" ['500',253],\n",
|
|
||||||
" ['600',304],\n",
|
|
||||||
" ['700',355],\n",
|
|
||||||
" ['800',405],\n",
|
|
||||||
" ['900',456],\n",
|
|
||||||
" ['1000',507],\n",
|
|
||||||
" ['1250',633],\n",
|
|
||||||
" ['1500',760],\n",
|
|
||||||
" ['1750',887],\n",
|
|
||||||
" ['2000',1010]]\n",
|
|
||||||
"\n",
|
|
||||||
"\n",
|
|
||||||
"#df = pd.DataFrame(wire_size, columns=[\"wire\",'area'])\n",
|
|
||||||
"\n",
|
|
||||||
"\n",
|
|
||||||
"x = np.array(wire_size)\n",
|
|
||||||
"row = np.where(x == '12')[0][0]\n",
|
|
||||||
"\n",
|
|
||||||
"\n",
|
|
||||||
"print(row)\n"
|
|
||||||
]
|
|
||||||
},
|
|
||||||
{
|
{
|
||||||
"cell_type": "code",
|
"cell_type": "code",
|
||||||
"execution_count": 19,
|
"execution_count": 19,
|
||||||
|
|
@ -857,95 +800,57 @@
|
||||||
"name": "stdout",
|
"name": "stdout",
|
||||||
"output_type": "stream",
|
"output_type": "stream",
|
||||||
"text": [
|
"text": [
|
||||||
"[None 167.0 307.0 507.0 792.0 1140.0 2027.0 2951.0 4560.0 6138.0 7870.0\n",
|
"53\n"
|
||||||
" 12439.0 17613.0 31225.0]\n"
|
|
||||||
]
|
]
|
||||||
}
|
}
|
||||||
],
|
],
|
||||||
"source": [
|
"source": [
|
||||||
"db_result_index = 3\n",
|
"db_result_index = 3\n",
|
||||||
"\n",
|
"\n",
|
||||||
|
"test = ' WHERE DB2 > 200'\n",
|
||||||
|
"\n",
|
||||||
"try:\n",
|
"try:\n",
|
||||||
" with sqlite3.connect(\"jepl-cec21.db\") as con:\n",
|
" with sqlite3.connect(\"jepl-cec21.db\") as con:\n",
|
||||||
" cur = con.cursor()\n",
|
" cur = con.cursor()\n",
|
||||||
" cur.execute('SELECT * from \"Table9\"')\n",
|
" cur.execute('SELECT \"Trade Size\" from \"Table9\"'+test)\n",
|
||||||
" table = cur.fetchall()\n",
|
" table = cur.fetchone()\n",
|
||||||
" conduits = np.array(table)\n",
|
" conduits = np.array(table)[0]\n",
|
||||||
"\n",
|
"\n",
|
||||||
"except sqlite3.OperationalError as e:\n",
|
"except sqlite3.OperationalError as e:\n",
|
||||||
" print(e)\n",
|
" print(e)\n",
|
||||||
"\n",
|
"\n",
|
||||||
"column = conduits[ :,db_result_index]\n",
|
|
||||||
"print(column)\n",
|
|
||||||
"#x = np.array(column)\n",
|
|
||||||
"#row = np.where(x = 200)[0][0]\n",
|
|
||||||
"\n",
|
"\n",
|
||||||
"#print(row)"
|
"print(conduits)\n"
|
||||||
]
|
]
|
||||||
},
|
},
|
||||||
{
|
{
|
||||||
"cell_type": "code",
|
"cell_type": "markdown",
|
||||||
"execution_count": 20,
|
|
||||||
"metadata": {},
|
"metadata": {},
|
||||||
"outputs": [
|
|
||||||
{
|
|
||||||
"ename": "TypeError",
|
|
||||||
"evalue": "'>=' not supported between instances of 'NoneType' and 'float'",
|
|
||||||
"output_type": "error",
|
|
||||||
"traceback": [
|
|
||||||
"\u001b[1;31m---------------------------------------------------------------------------\u001b[0m",
|
|
||||||
"\u001b[1;31mTypeError\u001b[0m Traceback (most recent call last)",
|
|
||||||
"Input \u001b[1;32mIn [20]\u001b[0m, in \u001b[0;36m<cell line: 1>\u001b[1;34m()\u001b[0m\n\u001b[1;32m----> 1\u001b[0m \u001b[43mjmk\u001b[49m\u001b[38;5;241;43m.\u001b[39;49m\u001b[43mconduit_size\u001b[49m\u001b[43m(\u001b[49m\u001b[38;5;241;43m4\u001b[39;49m\u001b[43m,\u001b[49m\u001b[38;5;124;43m'\u001b[39;49m\u001b[38;5;124;43m12\u001b[39;49m\u001b[38;5;124;43m'\u001b[39;49m\u001b[43m,\u001b[49m\u001b[38;5;124;43m'\u001b[39;49m\u001b[38;5;124;43m12\u001b[39;49m\u001b[38;5;124;43m'\u001b[39;49m\u001b[43m)\u001b[49m\n",
|
|
||||||
"File \u001b[1;32mc:\\Business\\JMKEngineering\\Engineering\\Active\\TEP Group\\2425_TEP_Shubie-tower-project\\eng\\resources\\JEPL\\jepl\\jepl_circuits.py:602\u001b[0m, in \u001b[0;36mconduit_size\u001b[1;34m(num_cc, cc_con, bond, material)\u001b[0m\n\u001b[0;32m 599\u001b[0m column \u001b[38;5;241m=\u001b[39m conduits[ :,db_result_index]\n\u001b[0;32m 601\u001b[0m x \u001b[38;5;241m=\u001b[39m np\u001b[38;5;241m.\u001b[39marray(column)\n\u001b[1;32m--> 602\u001b[0m row \u001b[38;5;241m=\u001b[39m np\u001b[38;5;241m.\u001b[39mwhere(\u001b[43mx\u001b[49m\u001b[43m \u001b[49m\u001b[38;5;241;43m>\u001b[39;49m\u001b[38;5;241;43m=\u001b[39;49m\u001b[43m \u001b[49m\u001b[43mmin_trade_area\u001b[49m)[\u001b[38;5;241m0\u001b[39m][\u001b[38;5;241m0\u001b[39m]\n\u001b[0;32m 604\u001b[0m \u001b[38;5;28mprint\u001b[39m(row)\n\u001b[0;32m 606\u001b[0m result \u001b[38;5;241m=\u001b[39m conduits[row][\u001b[38;5;241m0\u001b[39m]\n",
|
|
||||||
"\u001b[1;31mTypeError\u001b[0m: '>=' not supported between instances of 'NoneType' and 'float'"
|
|
||||||
]
|
|
||||||
}
|
|
||||||
],
|
|
||||||
"source": [
|
"source": [
|
||||||
"jmk.conduit_size(4,'12','12')"
|
"The Conduit sizing module is designed to size conduits based on the CEC values for the various conductor sizes with insulation.\n",
|
||||||
|
"\n",
|
||||||
|
"It returns two values, the trade size (diameter) in mm and the text for a cable/conduit schedule"
|
||||||
]
|
]
|
||||||
},
|
},
|
||||||
{
|
{
|
||||||
"cell_type": "code",
|
"cell_type": "code",
|
||||||
"execution_count": 22,
|
"execution_count": 25,
|
||||||
"metadata": {},
|
|
||||||
"outputs": [],
|
|
||||||
"source": [
|
|
||||||
"valid_material = ['RMC', # Rigid Metal Conduit\n",
|
|
||||||
" 'FMC', # Flexible Metal Conduit\n",
|
|
||||||
" 'RPVC', # Rigid PVC\n",
|
|
||||||
" 'EB1', # Type EB1\n",
|
|
||||||
" 'DB2', # Type DB2\n",
|
|
||||||
" 'LTMC', # Liquid Tight Metal Conduit\n",
|
|
||||||
" 'LTNMC', # Liquid Tight non-metallic conduit\n",
|
|
||||||
" 'EMT', # electrical metallic tubing\n",
|
|
||||||
" 'ENT', # electrical non-metallic tubing\n",
|
|
||||||
" 'SCH40', # HDPE Schedule 40\n",
|
|
||||||
" 'SCH80', # HDPE Schedule 80\n",
|
|
||||||
" #'DR9', # HDPE DR9\n",
|
|
||||||
" #'DR11', # HDPE DR11\n",
|
|
||||||
" #'DR135', # HDPE DR13.5\n",
|
|
||||||
" #'DR155' # HDPE DR15.5\n",
|
|
||||||
" ]"
|
|
||||||
]
|
|
||||||
},
|
|
||||||
{
|
|
||||||
"cell_type": "code",
|
|
||||||
"execution_count": 23,
|
|
||||||
"metadata": {},
|
"metadata": {},
|
||||||
"outputs": [
|
"outputs": [
|
||||||
{
|
{
|
||||||
"name": "stdout",
|
"name": "stdout",
|
||||||
"output_type": "stream",
|
"output_type": "stream",
|
||||||
"text": [
|
"text": [
|
||||||
"0\n"
|
"16 is the trade size\n",
|
||||||
|
"16mm SCH80 is the value you can use in your cable/conduit schedule.\n"
|
||||||
]
|
]
|
||||||
}
|
}
|
||||||
],
|
],
|
||||||
"source": [
|
"source": [
|
||||||
"x = np.array(valid_material)\n",
|
"conduit_size = jmk.conduit_size(4,'12','12')\n",
|
||||||
"row = np.where(x == 'RMC')[0][0]\n",
|
"\n",
|
||||||
"print(row)"
|
"print(str(conduit_size[0]) + \" is the trade size\")\n",
|
||||||
|
"print(conduit_size[1] + \" is the value you can use in your cable/conduit schedule.\")"
|
||||||
]
|
]
|
||||||
}
|
}
|
||||||
],
|
],
|
||||||
|
|
|
||||||
7
jepl/Tables/Z462-Tables/Z46215-table1A.csv
Normal file
7
jepl/Tables/Z462-Tables/Z46215-table1A.csv
Normal file
|
|
@ -0,0 +1,7 @@
|
||||||
|
Voltage,Movable LA SI,Movable LA Imperial,Fixed LA SI,Fixed LA Imperial,Restricted SI,Restricted Imperial
|
||||||
|
50,Not Specified,Not Specified,Not Specified,Not Specified,Not Specified,Not Specified
|
||||||
|
150,3,120,1,42,0,0
|
||||||
|
750,3,120,1,42,0.3,12
|
||||||
|
15000,3,120,1.5,60,0.7,26
|
||||||
|
35000,3,120,1.8,72,0.8,31
|
||||||
|
46000,3,120,2.5,96,0.8,33
|
||||||
|
7
jepl/Tables/Z462-Tables/Z46215-table1B.csv
Normal file
7
jepl/Tables/Z462-Tables/Z46215-table1B.csv
Normal file
|
|
@ -0,0 +1,7 @@
|
||||||
|
Voltage,Movable LA SI,Movable LA Imperial,Fixed LA SI,Fixed LA Imperial,Restricted SI,Restricted Imperial
|
||||||
|
50,Not Specified,Not Specified,Not Specified,Not Specified,Not Specified,Not Specified
|
||||||
|
300,3,120,1,42,0,0
|
||||||
|
1000,3,120,1,42,0.3,12
|
||||||
|
5000,3,120,1.5,60,0.4,17
|
||||||
|
15000,3,120,1.5,60,0.7,26
|
||||||
|
45000,3,120,2.5,96,0.8,33
|
||||||
|
|
|
@ -5,8 +5,11 @@ by: Jeff MacKinnon
|
||||||
email: jeff@jmkengineering.com
|
email: jeff@jmkengineering.com
|
||||||
'''
|
'''
|
||||||
import sys
|
import sys
|
||||||
|
from .jepl_general import *
|
||||||
from .jeplpv import *
|
from .jeplpv import *
|
||||||
from .jepl_circuits import *
|
from .jepl_circuits import *
|
||||||
|
from .jepl_templates import *
|
||||||
|
from .jepl_safety import *
|
||||||
|
|
||||||
def Test():
|
def Test():
|
||||||
print( "JMK Python Module works! !")
|
print( "JMK Python Module works! !")
|
||||||
|
|
|
||||||
|
|
@ -496,8 +496,8 @@ def bonding_conductor(conductor_ampacity,bus=False,material='cu',code = 'CEC'):
|
||||||
return bond_size
|
return bond_size
|
||||||
|
|
||||||
|
|
||||||
## This doesn't work yet, but its getting there
|
## This doesn't work yet, but its getting
|
||||||
def conduit_size(num_cc,cc_con,bond,material='EMT'):
|
def conduit_size(num_cc,cc_con,bond,material='SCH80'):
|
||||||
|
|
||||||
# Calculate fill requirements based on Table 8
|
# Calculate fill requirements based on Table 8
|
||||||
|
|
||||||
|
|
@ -582,33 +582,32 @@ def conduit_size(num_cc,cc_con,bond,material='EMT'):
|
||||||
# Total conductor area
|
# Total conductor area
|
||||||
|
|
||||||
area_conductors = cc_area + bond_area
|
area_conductors = cc_area + bond_area
|
||||||
|
#print(area_conductors)
|
||||||
|
|
||||||
min_trade_area = area_conductors / percent_fill # The minimum area of the conduit
|
min_trade_area = area_conductors / percent_fill # The minimum area of the conduit
|
||||||
|
#print(min_trade_area)
|
||||||
|
|
||||||
|
|
||||||
|
parameter = ' WHERE ' + material + ' > ' + str(min_trade_area)
|
||||||
|
|
||||||
try:
|
try:
|
||||||
with sqlite3.connect("jepl-cec21.db") as con:
|
with sqlite3.connect("jepl-cec21.db") as con:
|
||||||
cur = con.cursor()
|
cur = con.cursor()
|
||||||
cur.execute('SELECT * from "Table9"')
|
cur.execute('SELECT "Trade Size" from "Table9"'+ parameter )
|
||||||
table = cur.fetchall()
|
table = cur.fetchone()
|
||||||
conduits = np.array(table)
|
conduit = table
|
||||||
|
|
||||||
except sqlite3.OperationalError as e:
|
except sqlite3.OperationalError as e:
|
||||||
print(e)
|
print(e)
|
||||||
|
|
||||||
column = conduits[ :,db_result_index]
|
|
||||||
|
|
||||||
x = np.array(column)
|
|
||||||
row = np.where(x >= min_trade_area)[0][0]
|
|
||||||
|
|
||||||
print(row)
|
|
||||||
|
|
||||||
result = conduits[row][0]
|
|
||||||
|
|
||||||
|
|
||||||
return result
|
result_raw = conduit[0]
|
||||||
|
result_name = str(conduit[0]) + 'mm ' + material
|
||||||
|
|
||||||
|
|
||||||
|
return result_raw,result_name
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
|
||||||
30
jepl/jepl_general.py
Normal file
30
jepl/jepl_general.py
Normal file
|
|
@ -0,0 +1,30 @@
|
||||||
|
'''
|
||||||
|
JMK Engineering Inc. Python Library for design and such.
|
||||||
|
by: Jeff MacKinnon
|
||||||
|
|
||||||
|
email: jeff@jmkengineering.com
|
||||||
|
|
||||||
|
Some General Functions and things
|
||||||
|
|
||||||
|
'''
|
||||||
|
import pandas as pd
|
||||||
|
import numpy as np
|
||||||
|
import math
|
||||||
|
import sqlite3
|
||||||
|
|
||||||
|
|
||||||
|
def va(voltage, current,phases=3):
|
||||||
|
'''Calculate the Volt-Amp of a circuit
|
||||||
|
'''
|
||||||
|
|
||||||
|
if phases == 3:
|
||||||
|
va = (math.pi * voltage * current)
|
||||||
|
|
||||||
|
elif phases == 1:
|
||||||
|
vs = voltage * current
|
||||||
|
else:
|
||||||
|
print("Phases needs to be 1 or 3 for now.")
|
||||||
|
|
||||||
|
return va
|
||||||
|
|
||||||
|
|
||||||
129
jepl/jepl_safety.py
Normal file
129
jepl/jepl_safety.py
Normal file
|
|
@ -0,0 +1,129 @@
|
||||||
|
'''
|
||||||
|
JMK Engineering Inc. Python Library for design and such.
|
||||||
|
by: Jeff MacKinnon
|
||||||
|
|
||||||
|
email: jeff@jmkengineering.com
|
||||||
|
|
||||||
|
Electrical Safety
|
||||||
|
|
||||||
|
These functions are used to calculate boundaries, etc.
|
||||||
|
|
||||||
|
'''
|
||||||
|
|
||||||
|
import sqlite3
|
||||||
|
|
||||||
|
def limitedApproach(voltage,fixed=False,DC=False,unitsSI=True,year=2015):
|
||||||
|
|
||||||
|
if year == 2015:
|
||||||
|
database = "jepl-z46215.db"
|
||||||
|
|
||||||
|
if DC == True:
|
||||||
|
try:
|
||||||
|
with sqlite3.connect(database) as con:
|
||||||
|
cur = con.cursor()
|
||||||
|
|
||||||
|
cur.execute('SELECT * FROM "Table1B" WHERE "Voltage" > ? ', (voltage,))
|
||||||
|
row = cur.fetchone()
|
||||||
|
|
||||||
|
except sqlite3.OperationalError as e:
|
||||||
|
print(e)
|
||||||
|
else:
|
||||||
|
try:
|
||||||
|
with sqlite3.connect(database) as con:
|
||||||
|
cur = con.cursor()
|
||||||
|
|
||||||
|
cur.execute('SELECT * FROM "Table1A" WHERE "Voltage" > ? ', (voltage,))
|
||||||
|
row = cur.fetchone()
|
||||||
|
|
||||||
|
except sqlite3.OperationalError as e:
|
||||||
|
print(e)
|
||||||
|
|
||||||
|
|
||||||
|
if (fixed == False) & (unitsSI == True):
|
||||||
|
column = 1
|
||||||
|
elif (fixed == False) & (unitsSI == False):
|
||||||
|
column = 2
|
||||||
|
elif (fixed == True) & (unitsSI == True):
|
||||||
|
column = 3
|
||||||
|
elif (fixed == True) & (unitsSI == False):
|
||||||
|
column = 4
|
||||||
|
|
||||||
|
distance = row[column]
|
||||||
|
return(distance)
|
||||||
|
|
||||||
|
def restrictedApproach(voltage,DC=False,unitsSI=True,year=2015):
|
||||||
|
|
||||||
|
if year == 2015:
|
||||||
|
database = "jepl-z46215.db"
|
||||||
|
|
||||||
|
if DC == True:
|
||||||
|
try:
|
||||||
|
with sqlite3.connect(database) as con:
|
||||||
|
cur = con.cursor()
|
||||||
|
|
||||||
|
cur.execute('SELECT * FROM "Table1B" WHERE "Voltage" > ? ', (voltage,))
|
||||||
|
row = cur.fetchone()
|
||||||
|
|
||||||
|
except sqlite3.OperationalError as e:
|
||||||
|
print(e)
|
||||||
|
else:
|
||||||
|
try:
|
||||||
|
with sqlite3.connect(database) as con:
|
||||||
|
cur = con.cursor()
|
||||||
|
|
||||||
|
cur.execute('SELECT * FROM "Table1A" WHERE "Voltage" > ? ', (voltage,))
|
||||||
|
row = cur.fetchone()
|
||||||
|
|
||||||
|
except sqlite3.OperationalError as e:
|
||||||
|
print(e)
|
||||||
|
|
||||||
|
|
||||||
|
if (unitsSI == True):
|
||||||
|
column = 5
|
||||||
|
else:
|
||||||
|
column = 6
|
||||||
|
|
||||||
|
distance = row[column]
|
||||||
|
return(distance)
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
def gloveClass(voltage,DC=False):
|
||||||
|
'''
|
||||||
|
The glove class is based on the ASTM standard D120.
|
||||||
|
'''
|
||||||
|
|
||||||
|
if DC == True:
|
||||||
|
if voltage <= 750:
|
||||||
|
gloveclass = '00'
|
||||||
|
elif voltage <= 1500:
|
||||||
|
gloveclass = '0'
|
||||||
|
elif voltage <= 11250:
|
||||||
|
gloveclass = '1'
|
||||||
|
elif voltage <= 25500:
|
||||||
|
gloveclass = '2'
|
||||||
|
elif voltage <= 39750:
|
||||||
|
gloveclass = '3'
|
||||||
|
elif voltage <= 54000:
|
||||||
|
gloveclass = '4'
|
||||||
|
else:
|
||||||
|
gloveclass = "Voltage too High"
|
||||||
|
|
||||||
|
|
||||||
|
else:
|
||||||
|
if voltage <= 500:
|
||||||
|
gloveclass = '00'
|
||||||
|
elif voltage <= 1000:
|
||||||
|
gloveclass = '0'
|
||||||
|
elif voltage <= 7500:
|
||||||
|
gloveclass = '1'
|
||||||
|
elif voltage <= 17000:
|
||||||
|
gloveclass = '2'
|
||||||
|
elif voltage <= 26500:
|
||||||
|
gloveclass = '3'
|
||||||
|
elif voltage <= 36000:
|
||||||
|
gloveclass = '4'
|
||||||
|
else:
|
||||||
|
gloveclass = "Voltage too High"
|
||||||
|
|
||||||
|
return(gloveclass)
|
||||||
84
jepl/jepl_templates.py
Normal file
84
jepl/jepl_templates.py
Normal file
|
|
@ -0,0 +1,84 @@
|
||||||
|
'''
|
||||||
|
JMK Engineering Inc. Python Library for design and such.
|
||||||
|
by: Jeff MacKinnon
|
||||||
|
|
||||||
|
email: jeff@jmkengineering.com
|
||||||
|
|
||||||
|
Template Generation
|
||||||
|
|
||||||
|
These functions are used to create labels, reports, etc.
|
||||||
|
|
||||||
|
'''
|
||||||
|
from .jepl_safety import *
|
||||||
|
|
||||||
|
def af_label(equipment,working_distance,incident_energy,af_boundary,energy_level,voltage, author="Jeff MacKinnon",warning="warning",project="Arc Flash Warning Label",project_num="2500",DC=False,fixedElectrode = True, SI=True,project_year=2015,test=False):
|
||||||
|
|
||||||
|
'''
|
||||||
|
This function is for printing a single label with all the information in the function above. Include the units (in, Vac, Vdc, ft, m, mm, etc.) in the values. All values are strings.
|
||||||
|
'''
|
||||||
|
|
||||||
|
from datetime import date
|
||||||
|
date = date.today()
|
||||||
|
revdate = date.strftime("%m/%d/%Y")
|
||||||
|
|
||||||
|
if DC == True:
|
||||||
|
voltage_units = " Vdc"
|
||||||
|
else:
|
||||||
|
voltage_units = " Vac"
|
||||||
|
|
||||||
|
label_voltage = str(voltage) + voltage_units
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
glove_class = gloveClass(voltage,DC=DC)
|
||||||
|
limited_approach = limitedApproach(voltage,fixed=fixedElectrode,DC=DC,unitsSI=SI,year=project_year)
|
||||||
|
restricted_approach = restrictedApproach(voltage,DC=DC,unitsSI=SI,year=project_year)
|
||||||
|
|
||||||
|
|
||||||
|
if warning =="warning":
|
||||||
|
warning_colour = '242,85,31'
|
||||||
|
warning_text = '\warning WARNING'
|
||||||
|
elif warning == "danger":
|
||||||
|
warning_colour = '242,85,31' # This colour needs to change
|
||||||
|
warning_text = '\warning DANGER'
|
||||||
|
else:
|
||||||
|
warning_colour = '255,255,255' # This colour needs to change
|
||||||
|
warning_text = ''
|
||||||
|
|
||||||
|
from jinja2 import Environment, FileSystemLoader
|
||||||
|
|
||||||
|
environment = Environment( block_start_string = '\BLOCK{',
|
||||||
|
block_end_string = '}',
|
||||||
|
variable_start_string = '\VAR((',
|
||||||
|
variable_end_string = '))',
|
||||||
|
comment_start_string = '\#{',
|
||||||
|
comment_end_string = '}',
|
||||||
|
line_comment_prefix = '%#',
|
||||||
|
loader=FileSystemLoader("jepl/templates/")
|
||||||
|
)
|
||||||
|
template = environment.get_template("template-label-ArcFlash.tex")
|
||||||
|
|
||||||
|
if test == True:
|
||||||
|
filename = "test"+str(date) + "-"+project_num+"-label-ArcFlash.tex"
|
||||||
|
else:
|
||||||
|
filename = str(date) + "-"+project_num+"-label-ArcFlash.tex"
|
||||||
|
content = template.render(
|
||||||
|
DATE = revdate,
|
||||||
|
EQUIPMENT = equipment,
|
||||||
|
WORKING_DISTANCE = working_distance,
|
||||||
|
INCIDENT_ENERGY = incident_energy,
|
||||||
|
AF_BOUNDARY = af_boundary,
|
||||||
|
ENERGY_LEVEL = energy_level,
|
||||||
|
VOLTAGE = label_voltage,
|
||||||
|
LIMITED_APPROACH = limited_approach,
|
||||||
|
RESTRICTED_APPROACH = restricted_approach,
|
||||||
|
GLOVE_CLASS = glove_class,
|
||||||
|
AUTHOR = author,
|
||||||
|
TITLE = project,
|
||||||
|
WARNING_COLOUR = warning_colour,
|
||||||
|
WARNING_TEXT = warning_text,
|
||||||
|
|
||||||
|
|
||||||
|
)
|
||||||
|
with open(filename, mode="w", encoding="utf-8") as message:
|
||||||
|
message.write(content)
|
||||||
|
|
@ -59,6 +59,11 @@ CEC21_database = [
|
||||||
]
|
]
|
||||||
create_database('jepl-cec21.db',CEC21_database)
|
create_database('jepl-cec21.db',CEC21_database)
|
||||||
|
|
||||||
|
Z46215_database = [
|
||||||
|
['jepl-z46215.db','Table1A',location+'Tables/Z462-Tables/Z46215-table1A.csv'],
|
||||||
|
['jepl-z46215.db','Table1B',location+'Tables/Z462-Tables/Z46215-table1B.csv'],
|
||||||
|
]
|
||||||
|
create_database('jepl-z46215.db',Z46215_database)
|
||||||
|
|
||||||
|
|
||||||
cable_database = [
|
cable_database = [
|
||||||
|
|
|
||||||
BIN
jepl/templates/static/logo.png
Normal file
BIN
jepl/templates/static/logo.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 16 KiB |
127
jepl/templates/template-label-ArcFlash.tex
Normal file
127
jepl/templates/template-label-ArcFlash.tex
Normal file
|
|
@ -0,0 +1,127 @@
|
||||||
|
|
||||||
|
\documentclass[12pt]{article}
|
||||||
|
\pagestyle{empty}
|
||||||
|
|
||||||
|
%\usepackage[utf8]{inputenc}
|
||||||
|
\usepackage{tikz}
|
||||||
|
\usepackage{fourier}
|
||||||
|
\usepackage{geometry}
|
||||||
|
|
||||||
|
\usepackage{anyfontsize}
|
||||||
|
\usepackage{multicol}
|
||||||
|
|
||||||
|
\usepackage[export]{adjustbox}
|
||||||
|
|
||||||
|
|
||||||
|
\usetikzlibrary{calc}
|
||||||
|
|
||||||
|
\geometry{%
|
||||||
|
paperheight=105mm,
|
||||||
|
paperwidth=160mm,
|
||||||
|
top=2mm,
|
||||||
|
bottom=2mm,
|
||||||
|
right=2mm,
|
||||||
|
left=2mm,
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
\usepackage{layout}
|
||||||
|
\setlength{\parindent}{1pt}
|
||||||
|
|
||||||
|
|
||||||
|
\title{\VAR((TITLE))}
|
||||||
|
\date{\VAR((DATE))}
|
||||||
|
\author{\VAR((AUTHOR))}
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
\begin{document}
|
||||||
|
|
||||||
|
%% Header Warning Banner %%
|
||||||
|
\definecolor{warningcolour}{RGB}{\VAR((WARNING_COLOUR))}
|
||||||
|
|
||||||
|
|
||||||
|
% \thispagestyle{empty}
|
||||||
|
\begin{tikzpicture}[overlay, remember picture]%
|
||||||
|
\node[]
|
||||||
|
at ($(current page.north)+(0cm, -13mm)$) {%
|
||||||
|
\begin{tikzpicture}
|
||||||
|
\node[rectangle,
|
||||||
|
draw = white,
|
||||||
|
text = black,
|
||||||
|
minimum width = \textwidth,
|
||||||
|
minimum height = 23mm,
|
||||||
|
fill = warningcolour] (r) at (0,0)
|
||||||
|
{%
|
||||||
|
\fontfamily{phv}\fontsize{36pt}{40pt}\selectfont \textbf{\VAR((WARNING_TEXT))}% This is the warning text
|
||||||
|
};
|
||||||
|
\end{tikzpicture}
|
||||||
|
};
|
||||||
|
% This is the main message
|
||||||
|
\node[%
|
||||||
|
text width=\textwidth,
|
||||||
|
align=center,
|
||||||
|
]
|
||||||
|
at ($(current page.center) + (0cm,18mm)$) {%
|
||||||
|
\fontfamily{phv}
|
||||||
|
\fontsize{20pt}{100pt}\selectfont
|
||||||
|
\textbf{%
|
||||||
|
Arc Flash and Shock Hazard Present \\
|
||||||
|
Appropriate PPE Required
|
||||||
|
}
|
||||||
|
};
|
||||||
|
% This is the study Results
|
||||||
|
\node[text width=\textwidth, align=center]
|
||||||
|
at ($(current page.center) + (5mm,-7mm)$) {%
|
||||||
|
\begin{multicols}{2}
|
||||||
|
\textbf{ARC FLASH PROTECTION} \\
|
||||||
|
\vspace{3mm}
|
||||||
|
|
||||||
|
\begin{tabular}{ l l }
|
||||||
|
Working Distance & \textbf{\VAR((WORKING_DISTANCE))} \\ % Working Distance
|
||||||
|
Incident Energy & \textbf{\VAR((INCIDENT_ENERGY)) cal/cm$^2$} \\ % Incident Energy Value
|
||||||
|
Arc Flash Hazard Boundary & \textbf{\VAR((AF_BOUNDARY))} \\ % Arc Flash Boundary
|
||||||
|
Energy Level & \textbf{Level \VAR((ENERGY_LEVEL))} \\ % Energy Level
|
||||||
|
\end{tabular}
|
||||||
|
|
||||||
|
\columnbreak
|
||||||
|
|
||||||
|
\textbf{SHOCK PROTECTION}\\
|
||||||
|
\vspace{4mm}
|
||||||
|
|
||||||
|
\begin{tabular}{ l l }
|
||||||
|
Shock Hazard & \textbf{\VAR((VOLTAGE))} \\ % Shock voltage
|
||||||
|
Limited Approach & \textbf{\VAR((LIMITED_APPROACH))} \\ % Limited Approach boundary
|
||||||
|
Restricted Approach & \textbf{\VAR((RESTRICTED_APPROACH))} \\ % Restricted Approach boundard
|
||||||
|
Glove Class & \textbf{\VAR((GLOVE_CLASS))} \\ % Glove Class
|
||||||
|
\end{tabular}
|
||||||
|
|
||||||
|
\end{multicols}
|
||||||
|
};
|
||||||
|
% This is the equipment information
|
||||||
|
\node[text width=0.5\textwidth, align=left]
|
||||||
|
at ($(current page.west) + (45mm,-40mm)$) {%
|
||||||
|
\large
|
||||||
|
Equipment: \textbf{\VAR((EQUIPMENT))} \\
|
||||||
|
|
||||||
|
Date: \textbf{\VAR((DATE))} \\
|
||||||
|
\vspace{2mm}
|
||||||
|
\scriptsize
|
||||||
|
Arc flash analysis by \VAR((AUTHOR))
|
||||||
|
|
||||||
|
};
|
||||||
|
% This is the logo
|
||||||
|
\node[text width=0.5\textwidth, align=right]
|
||||||
|
at ($(current page.east) + (-40mm,-4cm)$) {%
|
||||||
|
\includegraphics[width=70mm,left]{jepl/templates/static/logo.png}
|
||||||
|
};
|
||||||
|
|
||||||
|
\end{tikzpicture}
|
||||||
|
|
||||||
|
|
||||||
|
\newpage
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
\end{document}
|
||||||
Loading…
Add table
Reference in a new issue